Overview

The Vanity Countertop Cleaning and Sealing Kit is designed to restore, protect, and extend the life of vanity countertops. The kit includes three products that work together to remove scratches or stains, clean and revitalize the surface, and apply a protective sealer for long-term durability.

The treated surface can be reused after 6–8 hours, with full curing achieved in 24–72 hours.

Care & Maintenance Guidelines

DOs

• Wipe spills immediately (water, soap, oil, acids, etc.).

• Clean countertop using mild, non-abrasive soap and water only.

• Rinse regularly with clean hot water and dry with a microfiber cloth.

• Apply a surface-hardening sealer annually to prevent damage and maintain appearance.

DON’Ts

• Do not allow liquids to sit on the stone.

• Do not use harsh or corrosive bathroom cleaners (bleach, ammonia, vinegar, etc.).

• Do not use scrapers or abrasive cleaning tools.

Kit Components & Steps

The kit includes three key products used in sequence:

1. Surface Scratch Remover

2. Revitalizer (Cleaner & Protector)

3. Sealer

Step 1: Surface Scratch Remover

Purpose:

Removes minor scratches and stains by gently buffing the surface.

Instructions

1. Put on gloves and protective glasses.

2. Clean the damaged area with water.

3. Protect surrounding surfaces—cabinets, handles, floors, etc.

4. Stir product until uniform.

5. Apply approximately 1 tsp per 4 sq. in. to the stained or scratched area.

6. For areas larger than 4 sq. in., work in 4 sq. in. sections.

7. Using a dry cloth, work the product in circular motions for 2–3 minutes.

   • Add small amounts of water if needed to keep a toothpaste-like consistency.

8. Remove with a paper towel and dry the area.

   • Repeat steps 4–6 if marks remain (may require multiple cycles).

9. Once the desired effect is achieved, clean with clear water.

Step 2: Revitalizer (Cleaner & Protector)

Purpose:

Removes residue from Step 1 and revitalizes the surface.

Instructions

1. Pour directly on the areas worked during Step 1.

2. Remove using a dry towel, lint-free cloth, or sponge (no rinsing required).

3. Repeat until the surface is clean.
   

Step 3: Sealer

Purpose:

Protects the countertop against future staining, moisture, and wear.

Instructions

1. Ensure cap is closed; shake well before use.

2. Apply a liberal, even coat using a paint pad, roller, brush, or low-pressure sprayer.

3. Allow the sealer to penetrate for 10–15 minutes, keeping the surface wet with product during this time.

   • Do not allow the sealer to fully dry on the surface.

4. Thoroughly dry the entire surface using clean absorbent towels (microfiber recommended).

5. For porous or absorbent surfaces, apply a second coat after 30–40 minutes.

6. If residue appears, re-wet with sealer, scrub with a white nylon pad, and dry again.

Safety Notes

• Avoid working any abrasive or acidic product longer than 10 minutes.

• Protect all surrounding surfaces during application.

• Use appropriate PPE (gloves, protective glasses).
  

Summary

This kit provides a complete solution for restoring and protecting vanity countertops. By following the three-step process—Scratch Removal, Revitalizing, and Sealing—users can significantly improve surface appearance and extend countertop life. Proper maintenance practices will help preserve the finish and prevent future damage.