SAGA/735H/Yosemite/Virtuoso Toilet: Remote Pairing Guide

SAGA/735H/Yosemite/Virtuoso Toilet: Remote Pairing Guide

The SAGA/735H/Yosemite/Virtuoso smart toilet is a cutting-edge bathroom fixture that offers a convenient and comfortable user experience. One of its notable features is the remote-control functionality, which allows users to operate the toilet from a distance. This knowledge article will provide step-by-step instructions on how to pair the remote control with the toilet, ensuring seamless functionality and control.

Before proceeding with the remote pairing process, please make certain that there are no items, such as tissue boxes, placed on the top of the toilet. This is the location from which the sensor is designed to receive signals from the remote. If the remote still does not operate the toilet, proceed with the pairing procedure after confirming this.

Please note that the following instructions specifically pertain to the remote pairing process for the SAGA/735H/Yosemite/Virtuoso toilet. Before proceeding with the pairing procedure, ensure that you have fresh batteries for the remote control.

Step 1:
  1. Unplug the Toilet and Remove Remote Control Batteries To initiate the remote pairing process, begin by unplugging the toilet from the power source. This ensures safety during the procedure. Next, remove the batteries from the remote control unit.
Step 2:
  1. Replace Batteries and Prepare for Pairing Insert fresh batteries into the remote control unit. Ensure that the batteries are properly aligned according to the polarity markings. Once the batteries are in place, proceed to the next step.
Step 3:
  1. Plug in the Toilet and Enter Pairing Mode With the batteries installed, plug the toilet back into the power source. At the same time, simultaneously press and hold the "Stop" button on the remote control. Keep the button pressed while plugging in the toilet. This action triggers the pairing mode for the remote control.
Step 4:
  1. Power On the Toilet After plugging in the toilet while holding the "Stop" button, release the button and press the "Power" button on the toilet to turn it on. This step ensures that the toilet is ready to receive signals from the remote control.

Test the Pairing To verify successful pairing, press either the "Light" or "Flush" button on the remote control. Check if the corresponding action occurs on the toilet. If the toilet responds to the command, the pairing has been successful.

Pairing the remote control with the SAGA/735H/Yosemite/Virtuoso toilet enhances user convenience and offers seamless control over its features. By following the step-by-step instructions provided in this knowledge article, you can easily pair the remote control with your toilet, ensuring a hassle-free experience. Enjoy the advanced functionalities and effortless operation that the SAGA/735H/Yosemite/Virtuoso toilet brings to your bathroom.