Here, we will guide you through installing a new pop-up drain and replacing the overflow cover for your bathtub. These tasks can be done with minimal tools and experience, making it a relatively simple DIY project. Follow these steps to ensure a smooth installation.
The pop-up drain can be easily removed following these steps:
Step 1: Lift the pop-up drain from the open position by pulling it upwards.
Step 2: Once the drain is lifted, unscrew the drain by turning it counterclockwise. Continue turning until it completely detaches from the strainer.
Once the old drain is removed, proceed to install the new one:
Step 2: Begin screwing the new pop-up drain by turning it clockwise until it is securely fastened.
Step 3: Test the functionality by pressing it down to close the drain, and then press down again to pop it back up.
The overflow cover is typically easy to remove. Here’s how:
Step 1: Locate the current overflow cover. If it’s a push-in type, it won’t be screwed in.
Step 2: To remove it, gently pry it off by inserting a butter knife or flat tool around its edge and applying light pressure. Be cautious to avoid scratching the tub.
Step 3: Pull the cover out from the opening.
After removing the old cover, you can now install the new one:
Step 1: Align the new cover with the overflow opening.
Step 2: Firmly push the cover into place until it clicks or feels securely attached.
After installing both the pop-up drain and the overflow cover: