Front and Rear Wash with Adjustable Pressure & Nozzle Position
Heated Seat, Water, and Air Dryer (4 levels)
Auto Flush & Auto Deodorization
UV Sterilization & Night Light
Power-Saving ECO Mode
Remote Control + Rotary Knob
Emergency Flush with Battery Box (10 AA batteries)
Action | How to Perform |
---|---|
Power On/Off | Hold rotary knob 3 sec or use remote |
Front/Rear Wash | Use knob or remote – pressure adjustable |
Drying | Press “Dryer” on remote or hold rotary knob |
Flush | Tap knob or remote; auto flush also available |
Night Light | Automatically turns on/off with ambient light |
Save Preset | Long press water pressure+/nozzle forward |
Activate Preset | Long press water pressure−/nozzle backward |
Embed installation video below ⬇️
Required Tools:
Silicone, Wrench, Screwdriver, Tape Measure, Drill (1/4”), Knife
Key Steps:
Install mounting bracket & wax ring
Secure toilet to floor
Connect water supply via T-valve
Plug into GFCI outlet
(Optional) Install battery box and remote holder
Apply silicone around base and let cure 24 hrs
Clean only with soft damp cloths (no alcohol/bleach)
Do not spray directly with water
Use “Clean Nozzle” function for regular nozzle hygiene
In freezing environments: allow 30 min warm-up before use
Problem | Quick Fix |
---|---|
Flashing lights/beeping | Unplug 1 min, then reset |
No response | Check GFCI, hold knob 3 sec |
Weak wash pressure | Clean nozzle, hose, and filters |
Cold water/seat | Re-enable temperature settings via remote |
Remote not working | Replace batteries or re-pair |
1 year: Electronics
5 years: Ceramic & fittings
Commercial use voids warranty.
Support: Open support ticket
Phone: 1-866-839-2888
Hours: Mon–Fri, 8 a.m.–5 p.m. EST