Front and Rear Wash Modes
Heated Seat & Warm Water
Warm Air Dryer with Adjustable Temperature
Auto Deodorization
Night Light & Nozzle Cleaning
User Presets
Remote Control Operation
| Action | How to Perform |
|---|---|
| Power On/Off | Press “Power” on remote |
| Front/Rear Wash | Select mode, adjust pressure/temperature |
| Dryer | Press “Dry” button |
| Nozzle Cleaning | Use “Nozzle Clean” button |
| Seat & Water Temp | Adjustable in 4 levels |
| Night Light | ON/OFF via remote |
| Save User Settings | Long press water pressure buttons |
[Embed installation video below]
Required Tools:
Silicone, Wrench, Screwdriver, Drill (1/4”), Measuring Tape
Key Steps:
Place wax ring and mount the toilet.
Connect T-valve to water inlet.
Plug into grounded GFCI outlet.
Install battery box for emergency flush.
Secure toilet and apply silicone seal.
Clean with soft cloth only – no harsh chemicals.
Avoid spraying water directly on the unit.
Clean nozzles regularly using remote function.
Winter storage: prevent freezing by defrosting unit for 30 minutes in a warm room.
| Problem | Quick Fix |
|---|---|
| Beeping or flashing | Unplug for 1 min, then restart |
| No flush or heat | Confirm power connection & settings |
| Weak wash pressure | Check hose or clean filters |
| Remote unresponsive | Replace batteries or re-pair device |
1 year on electronics
5 years on ceramic and fittings
Commercial or improper use voids warranty.
Support: Open support ticket
Phone: 1-866-839-2888
Hours: Mon–Fri, 8 a.m. – 5 p.m. EST